Metal Corrugated Sheet Cold Roll Sheet Forming Machine

September 13, 2024

Model NO.: corrugated sheet forming machine

Certificate: ISO9001:2000/Ce

Power Source: Electric

Feature: Automation

Advantage: Simple Structure

Warranty: 24 Months

Forging Forming Method: Mold Forging

Suitable Material: Q235, Q345, G550 for Gi, PPGI, Gl, PPGL

Suitable Thickness: 0.14mm to 2mm

Machine Type: Cold Roll Forming Machine

Final Product: Metal Tile, Roof Tile, Corrugated Sheet, Purlin

Trademark: STW

Transport Package: Machine in 40′′gp,Other Accessories in Wooden Case

Specification: CE

Origin: China

HS Code: 84552210

Machine Specification

No.	item		Parameter(all is subject to our final design)
1	Suitable raw material	Type	Common galvanized & pre-painted steel
		Yield strength	235MPa(or other high strength steel)
		Thickness(mm)	0.4-0.7
		width(mm)	According to final design
2	Manual uncoiler's capacity		5tons
3	Forming speed(m/min)		About 18-22m/min
4	Main motor power(KW)		7.5kw
5	Hydraulic power(KW)		3kw
6	Forming roller groups		Around18-20 groups
7	Raw material of forming roller		High quality No.45 steel
8	Raw material of cutting blade		Cr12mould steel with quenched treatment
9	controlling system		Mitsubishi PLC& converter
10	Suitable industrial voltage		According to your special requirement
11	Machine dimensions(LWH)		6.8m×1.8m×1.52m
12	Machine weight		About 9-10tons

Roof Panel Roll Froming Machine; Steel Corrugated Sheet Forming Machine; Steel Sheets Forming Machine; Roll Forming Machine; Forming Machine; Cold Roll Forming Machine; Steel Corrugated Forming Machine.

Components:
The Uncoiler and Its Base
Coil Sheet Guiding and Adjusting Equipment
Film Covered Device
Main Roll Forming System
Post-Cutting Device
Hydraulic Station
PLC Control System
Support Table
The Technical Parameters:
Suitable Raw Material: Color Steel Sheet; Galvanized Steel Sheet
Thickness of The Material: 0.4m to 0.7mm
Yield Strength of Material: 235mpa
Uncoiler's Loading Capacity: Max. Capacity: 5000kgs. (Can Be Increased to Be 10 Tons)
Forming Speed: About 15m/Min
Main Motor Power: 5.5kw(Depend on Final Design)
Hydraulic Station Power: 2.2kw(Depend on Final Design)
Controling System: Mitsubishi PLC & Converter
Voltage: 380V, 3 Phase 60Hz or According to at Buyer's Requirment.
The Quantity of The Roller Group: At Lest 15 Groups(Depend on Final Design)
Machine Dimension: About 20m*1.5m*1.4m(Depend on Final Design)
Total Weight: About 10000kgs(Depend on Final Design)
Material of Roll Former System
Roller: High Grade No. 45 Forged Steel, Plated Hard Chromed on The Surface of Rollers
With Thickness 0.05mm.
Active Shaft Material: High Grade No. 45 Carbon Wrought Steel at Diameter 75mm.
Cutting Blade: Cr12 Mould Steel with Quenched Treatment.
Working Flow
Decoiling The Sheet---Guiding The Sheet---Covering The Film---Roll Forming---Measuring The Length---Cutting The Panel---Panels to The Supporter

prossimo

Contattaci

Author:

Mr. tonja

E-mail:

sales@tonjaism.com

Phone/WhatsApp:

18102979203

Prodotti popolari

News